Understanding AI AutoDeploy

Overview 

AI AutoDeploy configures your room’s AV system for you. No manual routing or trial-and-error is required. 

Once devices are connected, RoomHub detects microphones, speakers, amplifiers, and PTZ cameras. You choose which devices to use, and AI AutoDeploy completes the setup. 

The result is a fully configured, working room in minutes. 

———————————————————————————————————————————————

How it works 

Finding and testing devices 

When AI AutoDeploy starts, RoomHub automatically discovers everything connected to the system. It: 

• Finds all connected AV devices 

• Tests basic connectivity 

• Verifies full functionality with system tests 

Once devices are confirmed, AI AutoDeploy:

• Sets up correct internal signal routing 

• Creates all required Dante subscriptions automatically 

• Configures control logic so the system behaves correctly 

This ensures audio flow and system control are ready before tuning begins. 

———————————————————————————————————————————————

Audio tuning (AudioIQ) 

Audio tuning is handled by AudioIQ, Pleneo's calibration engine. RoomHub: 

• Plays reference audio through the speakers 

• Measures the room using the ceiling microphones 

• Analyzes reverberation, ambient noise, and reflections 

Using reference data from Pleneo-tested microphones and speakers, AudioIQ automatically adjusts the audio performance. 

The outcome is clear, natural, and intelligible speech, tuned specifically for the room. 

AudioIQ is the complete measurement and tuning process within AI AutoDeploy. It's covered in more detail in a dedicated article. 

———————————————————————————————————————————————

Supported devices 

AI AutoDeploy works with: 

• Pleneo speakers 

• Pleneo-certified microphones 

If you use third-party speakers or custom Dante microphones, AI AutoDeploy isn't available. In these cases, setup must be completed manually using Dante controller. 

A full compatibility list is available under “Works with Pleneo”. 

———————————————————————————————————————————————

Why AI AutoDeploy matters 

AI AutoDeploy removes complexity and delivers consistent results: 

1. Enables Zero Touch Cloud Deployment 

2. Fully automatic setup from detection to tuning 

3. Validated devices before audio calibration 

4. Optimized audio through AudioIQ 

5. Automatic control logic and system behavior

6. Camera-ready setup when using Pleneo RoomVision cameras  

The process is predictable and repeatable, delivering consistent system quality no matter who deploys the room. 

———————————————————————————————————————————————

In summary 

AI AutoDeploy is the complete automated setup process for Pleneo rooms. It combines: 

• Device discovery and validation 

• Automatic routing and control configuration 

• Camera preparation 

• AudioIQ acoustic tuning 

The process is the same whether you deploy one room or many.